Resurrecting Samsung S109 is simple. Phone is auto powered on with charger connected; battery presence is not required.
Resurrector re-flashes only firmware zone of the phone (0×000000 to 0x3FFFFF).
To resurrect Samsung S109:
- Solder JTAG cable to Samsung S109 JTAG pads;
- Connect ignition cable for auto power on or use battery;
- Make sure Samsung S109 is selected in the list of models;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- De-solder JTAG wires;
20.04.2011 JTAG Manager v1.31, RIFF Box Firmware v1.23 released
Whats new :
JTAG Manager 1.31
- “RUN/STOP” Loaders functionality is added (and alternative to the DCC Loaders)
Firmware 1.23
- Added 8/16/32-bit bus read/write access rotuines for ARM7 core
- ARM7 debug is now available in ARM/Thumb modes (use the GDBServer for this);
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
RIFF Box – JTAG Revolution
No comments:
Post a Comment